The table below outlines typical dimensional characteristics for cable constructions conforming to MIL-DTL-5898, including conductor count, minimum jacket wall thickness, and nominal outside diameter. These dimensions apply to standard military part types and are intended as reference values.
MIL-DTL-5898 cables are designed for demanding communications applications where durability, fatigue resistance, and consistent mechanical performance are required.
How to Use This Table
- Type: Military cable designation
- Military Part Number: Associated MIL-DTL-5898 identifier
- Number of Conductors: Total insulated conductors
- Minimum Jacket Wall: Nominal jacket thickness
- Overall Nominal OD: Finished outside diameter
Values shown represent typical constructions and may vary based on material selection and application-specific requirements.
Design Notes
- Dimensional values are governed by specification requirements
- Variations or modified constructions may be available
- Jacket material and formulation influence final OD
- Dimensional confirmation occurs during engineering review
Engineering Support
If dimensional constraints or compliance requirements are critical, Gavitt’s engineering team can review application needs and confirm appropriate MIL-DTL-5898 constructions.
| Mil-DTL-5888 Type | Military Part Number | # Cond. | Minimum Jacket Wall | Overall Nom. O.D. |
|---|---|---|---|---|
| WF-5/U | M5898-WF5U4 | 4 | 0.025 | 0.280 |
| WF-14/U | M5898-WF14U4 | 4 | 0.025 | 0.300 |
| WD-34/U | M5898-WD34U2 | 2 | 0.012 | 0.160 |
| WM-53/U | M5898-WM53U5 | 5 | 0.025 | 0.280 |
| WM-85/U | M5898-WM85U5 | 5 | 0.025 | 0.305 |